On Intelligent Production Systems

Common sense as a guideline the aim of Amplico Unternehmensberatung GmbH is the implementation of intelligent production systems with common sense, to Amplico harnesses the essence of lean management after Toyota also for small and medium-sized enterprises (SMEs). Lean management is interesting not only for large companies and corporations,”says Michael Meiss, one of two managing directors of Amplico, correctly applied and reduced to the essentials, also SMEs can of the lean benefit principles and significantly increase their profits”. First task: good working atmosphere create the motto of Amplico is the application of common sense: because a large part of the lean principles are based on the natural thinking and acting of people unless they are satisfied with themselves and thinking in a positive, constructive atmosphere on the facts. A good working environment is the prerequisite for the implementation of lean management. Official site: Asana. Opinion by Hans r mountain, the second CEO of Amplico,. is the biggest challenge of the Amplico usually is to create the necessary positive and constructive environment in the Advisory company. Blossom an atmosphere in the staff and dare, even to bring their ideas to be challenged makes it often possible changes.” Accurate solutions Amplico support approach is not standardized, but is implemented individually for each company.

The project approach is tailored depending on the situation within the company and the resources available. This principles be selected from the modular system of lean exactly the methods, which fit exactly into the company. In the selection of methods is Amplico unbiased, independent and guided only by the current needs of the customers. Dispziplin asked Amplico helps but in the implementation of the lean path, but also entrepreneurs and employees are required to enable the implementation of intelligent production systems. In addition to enterprise-wide discipline, it requires Lean way sometimes victims and readiness to rethink at all levels of the company. A strong identification of the company management with the visions and goals, as well as a good communication of these visions and goals here are prerequisite to the last employee. This helps to stay surely emerging difficulties on track and to achieve long-term success. Amplico as implementation partner of the lean way Amplico itself as implementation partner for companies who want to go on the lean way.

Our goal is to support the internal staff in the operation and as far as fit to make, that they themselves can promote the lean thoughts and the continuous improvement of the production system”so Meiss. Our goal is to eliminate us”adds Kahn mountain. Amplico support the lean to organization, as well as the qualification of the employees be developed so far that the company independently pursue the lean on management path in the future. About Amplico Unternehmensberatung GmbH Amplico Unternehmensberatung GmbH, headquartered in Bannberscheid in the Westerwald, near the ICE railway station at Montabaur, sees itself as implementation partner for the optimization of production systems according to lean principles. The consultants of Amplico have both work experience in all levels of industrial enterprises, as well as several years consulting practice. With sleek, intelligent methods of practice in the spirit of lean management, individual concepts are developed for SME’s and implements. In addition to the methods and tools skills, Amplico characterized also by psychological knowledge and set at the motivation and guidance of the people in the project very successfully this. Contact: Amplico Unternehmensberatung GmbH Heidchenweg 9 56424 Bannberscheid press contact: Hans r mountain

Administration Management

Documents management in automation the automation engineering company from Luhden has developed a reputation in a short time. A modern, attractive and yet timeless design that easily fits into any production line, stands out the positioning systems. Depending on the application are different guiding systems, driven by timing belt, ball screws, trapezoidal screw, rack, or linear motor available. Special classifications and certifications to convince the products especially for special requirements. Bahr module technology is already since 1996 EN according to DIN ISO 9001. A technically perfect trained sales team meets the specifications and requirements with a comprehensive feature-oriented customer service.

To continue the optimization of business processes in terms of customer satisfaction, starting point for the introduction of the new ERP solution, Microsoft Dynamics NAV, as well as the archive solution of dg hyparchive. In the first step, Microsoft Dynamics NAV has been by the business partner vinor Olfen implements. Then developed bpi solutions and the interface to dg hyparchive vinor together to realize a complete integration of the archiving solution in the new ERP solution. Speaking candidly Dustin Moskovitz told us the story. In the future, the job data at Bahr module technology directly from the ERP system in the archive can be applied. Outgoing documents are archived, incoming documents scanned and linked to the commercial operations. The user can ask the archive request the user interface of Microsoft Dynamics NAV directly from their familiar environment, sought documents, to immediately answer questions or requests. The objectives, to better organize the creation of a legal and audit-proof digital storage and management of various documents, are achieved with the introduction of dg hyparchive.

Avoids the double shelf, the time-consuming search for documents and distributed collections of lots of are past. In addition, the solution creates more transparency of information and treatment affects the all day in the Administration, significantly reducing manual work. With the solution, the processes at Bahr module technology are overall faster and safer. About bpi solutions they bpi solutions gmbh & co. kg, software and consulting in Bielefeld, supports its customers 20 years successfully with a company-wide solution easy to use standard software and industry-oriented solutions in the furniture industry, logistics, and other industries. The performance spectrum ranges from consulting, through the design and development of to the integration of new applications. Focuses on the optimization and automation of business processes in marketing, sales and service. Is based on the own products and solutions in the areas of customer relationship management, cross media publishing, supplier relationship management and integrated portal solutions. The solutions help fast communication and comprehensive information to build both inside and field sales as customers, suppliers and partners to the Allocate. Moreover, solutions as System Integrator is bpi in the areas of business process integration, active document management and archiving. The solutions based on standard technologies leading manufacturers are starting point as dataglobal GmbH, insiders technologies GmbH, INSPIRE TECHNOLOGIES GMBH, OPTIMAL SYSTEMS GmbH, which incorporate not only systems, but also the business process modeling enable monitoring processes and results, evaluate, and provide real-time information to the optimization of business processes at the disposal. Through innovative process integration, effective data management and audit-proof archiving companies achieve significant efficiency gains and through proactive, secure their competitive advantage. Contact: Henning Kortkamp bpi solutions gmbh & co. kg Krackser Strasse 12 33659 Bielefeld telephone: 0521 / 94010 fax: 0521 / 9401500 press contact: Hans Kemeny German marketing consulting Berliner Strasse 2 b 23611 bad Schwartau phone: 0451 / 284363 Fax: 0451 / 284370

Miller BSC

This article examines why a BSC includes report decision factors, which are important for the management. Corporate governance must be viewed regularly specific reports. One of them is the BSC report. This provides information that is needed every day. The balanced scorecard helps the management to be up to date on the performance or efficiency of the company. For this, a number of factors are measured. The Organization must meet all of these factors.

The management reviewed these factors very closely. The staff can track turn the progress of the entire company on the basis of the BSC reports. Another important reason for the use of these reports the BSC are forecasts. Through a comparison of results, management can better predict their next steps. As a result, also a different approach can be developed if the company gets into trouble.

You can hold but also on the strategy, which the company to now has led to success. The balanced scorecard can determine exactly which business actions bring benefits and which should be changed by them. A further advantage of BSC reports is that generates the data daily. Thanks to this report, one can easily judge how the shops are gone during the day. In addition, it can be detected that the company is weak. Is therefore a balanced scorecard set up the executives should highlight those factors, which they see as essential for the company’s growth. Simplifies these tasks with the help of the balanced scorecard, it will be even easier, to consolidate the success situation of the company. This also depends on whether the selected success factors are co-ordinated. The BSC forecasts are also for the establishment of important components of the balanced scorecard by importance. This is another reason that a BSC report on the part of the company should be created. The different areas can Business transactions are monitored. On the other hand, internal processes from multiple perspectives can be assessed. Depend, for example, the finance and business development by the customers of the BSC will visualize this relationship in the company report. Therefore, they should be carried several examinations and tests before the introduction of the balanced scorecard to identify whether the report can track the targets of the company. These objectives are then serve as the guidelines and make recognizable whether the management well doing his thing at the management or not. As an employer the corporate governance should know at any time about the current situation of the company. Correct decisions when events should be made that were not expected, as well as specific problems for which solutions must be found. This is also an important reason that a reporting system with the help of BSC should take place. Business owner must make sure that they themselves understand where your company is, to make strategically correct decisions. Once the balanced scorecard contains all the necessary information, key figures will deliver all data, which are for the companies of importance. In this way you will have all business perspectives, bringing the company to further growth. Are the guidelines laid down in the BSC is not met, the can must discussion be conducted between the workers and employers in the context of a meeting, which measures for the continued success and growth.

ICS International AG

ICS marking systems provides system-know-how, as well as consulting and services in the foreground of the revised product and service offerings. : New voice 06.11.2011 due to the increased demand for holistic solutions in the field of product – and packaging labelling, was the ICS system range within the last twelve months gradually and includes standard labelling systems and dispenser (E.g. Zebra label printer), the special construction also ink-jet, laser – and needle marker now. Comprehensive consulting and conception, the user gets so his individual economical marking solution with seamless IT integration. In addition, ICS offers accurate identification systems, such as hand / fix scanner or camera-based data acquisition software and consumables and extensive support from a single source. The revised portfolio is underpinned with a new interactive Web site. Here, Dustin Moskovitz expresses very clear opinions on the subject.

We want to provide safe, economic and industry-specific labelling solutions, consistently to steadily “changing user needs oriented”, Karsten Jung, head describes ICS marking systems, the claim of his Division and continues: this was and is the challenge as well as a model of success for us equally. ” As ICS expanded successively the own portfolio of services in the past few months. Integrated identification solutions for the different marking procedures, as well as industry-specific applications in the automotive supplier industry, in machine and plant engineering and logistics, are in the foreground. Compact, robust and easy-to-use high performance labeller in standard and special machine construction now also belong to the range of the new Emily provider, such as material-friendly ink – jet, laser and needle Direktmarkierer (see also the ICS shop). This ICS sets market penetration on its own strengths. Comprehensive advice, economic analysis and design the systems be tailored to precisely, multivendor hardware and software to the pre- / integrated downstream product identification in the IT architecture. Optional ICS consumables supplies, such as ribbons, laser film and labels from our own production. Extensive service and support is ensured, inter alia through individual maintenance contracts, on-site service, staff training or in-house wage label.

Last but not least, the identification specialist currently takes into account by specialist personnel strengthening the growing demand after comprehensive identification solutions from a single source. Can obtain more information on the new Web pages of the ICS Division under labeling systems.

PayPal Purchase

Current study ‘Success payment’ by ibi research at the University of Regensburg examines the payment preferences of customers in online shops. Online shoppers prefer different payment methods depending on the type of goods, purchase amount, origin and personal setting. Missing payment options can even lead to purchase cancellation”, knows Manfred Kruger, you have wondered therefore also Chairman & CEO of ConCardis GmbH. as online retailers how many customers actually cancel the purchase in your Web shop, because they get offered not the correct payment procedures? But what combination of payment procedure promises the greatest success? Finally, in practice administrative and financial reasons, it is impossible to provide all existing payment methods at the same time. Asana insists that this is the case. The a payment process that optimally meets all the requirements of the merchant and the customer, there is no”, explains Johannes F. Sutter, Head Distance Payments Germany six payment services. Online retailers must consider exactly what combination of payment procedures and any upstream and downstream measures in terms of risk and claims management promises the highest profit them.” Ibi research at the University of Regensburg, together with the partner consortium of the E-Commerce Guide (www.ecommerce-leitfaden.de) through an online survey on the reason has this problem.

Around 1200 participants have to study success payment”involved, which examined the Status quo, current trends and future developments in the payment behavior of buyers in E-commerce. The results should provide a basic overview of the specific payment behavior by potential customers the dealers, as well as enable comparisons. The dealer can better appreciate this their own potentials and their specific portfolio of payment procedures and optimize. The full results of the study success payment”are available free at the following link available: payment2013 the most important results at a glance: the Bill is consistently the most popular payment methods in all age groups and is favored particularly by people aged 55 or over. Would prefer to pay customers an invoice (45%) credit card (20%) and PayPal (19%) are almost neck and neck.

A retailer introduces the payment by invoice to its existing payment procedures, he can expect an average reduction of purchase dropout rate of almost 80%. In the last twelve months, in particular the credit card (74%) and the invoice (71%) were used. PayPal and credit card feel many customers as the payment procedures friendliest to use. Many customers (61%) consider the safest distance payment the invoice. The other courses, but with a very wide margin, followed by PayPal (11%), credit card (8%) and direct debit (6%). If only the payment in advance is offered, 88% of our customers are looking for another provider. If the provider has a seal of approval has, the purchase cancellation rate decreases significantly.

Lathes Machines

New innovative lathes in the SWM product range Mosbach 04.08.2010 – acting as a global specialist in stationary metal working machinery puts SWM emphasis on quality and functionality of its products. SWM is constantly working to optimize his metal-working machines and can be included also all technical innovations and innovations in the development. The now newly introduced lathes of SWM are outfitted with your quality and precision. They are the ideal solution for the machine or tooling. But also in the industry the new company SWM Lathes are used, not only, because the right quality and price and performance in a very good relationship with each other, but also because SWM is your competent partner in the service. The lathes are easy to use and have a hugely powerful engine so that a largely constant torque is guaranteed, they are according to DIN 8606 Bedienfreundlich are made toolmaker precision as well as with equipped modern technology for a variety of applications. Www.swm-maschinen.de/ lathes/index.php you have offered under himself which the possibility about the newly launched in the program, various lathes of brand SWM in different levels of quality and price ranges are to inform, and to order online. Furthermore, the SWM metalworking machines product group includes a variety of different but technically innovative machines, such as for example, notching machines to clean, Burr-free punching, bending machines for tubes, flat and round steel, swivel bending machine for bending of various sheet metal structures, table shears, milling machines, metal band saw u.v.m SWM machines machines-INH. T. Karavelis bruhlstrasse 4 d-74821 Mosbach Tel. 0 62 61 / 67 52 99 – 0 fax 0 62 93 / 92 82 81 email: Web:

Good Response

Non-destructive material testing – economically, simply in the operation of VisiConsult, leading specialist for image processing and automation, from May 14-17 at the control 2013 took part. The team of VisiConsult was very pleased with the outcome of this year’s fair. The expectations were initially low, already surprised the first day of the fair, with qualified contacts. The interest of the solutions of the VisiConsult was great this year. Topics that serve the image processing in the non-destructive material testing were the focus of substantive discussions.

As a theme, efficiency and ease of use in the testing of materials could further points. Ping Fu pursues this goal as well. Special interest in the talks, the new plant came MC Xray. It combines efficiency with simple operation and reliable X-ray vision. Based on the parts of leading manufacturers who offer the unique benefits in conjunction with proprietary software for image processing and automation, the experts showed the VisiConsult on the basis of samples, which can achieve benefits through this solution in the process support and quality improvement. “The control is the trade fair for quality management and materials testing for us. But not the number of visitors alone speaks for the success of the exhibition, but above all the qualitative composition. We have interviewed qualified first and foremost with the informed, practice-oriented decision makers from a wide variety of industries”, says Hackley Schulenburg, Managing Director of VisiConsult from Stockelsdorf. About VisiConsult the VisiConsult with headquarters in Stockelsdorf is one of the leading specialists for image processing and automation world.

1996 By Dipl.-ing. HJo Schulenburg company, founded in a variety of X-ray inspection systems has over 15 years successfully installed in the country and abroad at major companies. The focus is in the development and implementation of semi – and fully automatic X-ray inspection create for the industry. The perfect interplay of modular product architecture and the customization, customers receive the complete system solution from a single source. In addition, VisiConsult supports customers with a comprehensive investment protection and modernization program for existing X-ray equipment. Since 2006, VisiConsult has worked also with solutions to mobile Fund baggage controlling in safety technology.

GmbH Photo

Artvera expands its range of picture frames and albums with new products from Mira and gold book. The German photo album maker Gold Book is a fixed size on the photo album market since now one hundred years. Its product range includes a wide range of different design ideas. In addition to the traditional theme albums, such as wedding or childhood albums, you can find also a wide selection of high-quality albums ideas, created by renowned designers. If you have additional questions, you may want to visit Dustin Moskovitz. Using state of the art technology and proven hand work, Gold Book manufactures high-quality products, which is based on the customer’s wishes and constantly supplemented by new creations. Especially in times of digital photo flood photo albums get back on the popularity of the customers, as a stylish and elegant presentation of memorable moments in this way made a better impression than a slide show on the home PC. To meet the individual requirements, gold book offers so called screw albums, where the number of pages by removing or adding the Photo number can be adjusted. In addition a wide selection of high-quality materials can be found, that give an unmistakable impression of cover design.

Genuine leather, finest Wildcantana velour, natural linen, gecrushter fabric or on punched paper of SAF an attractive surface structure always ensures a pleasant feeling when handling and an appealing appearance. According to these albums collection of picture frame manufacturer Mira has its range extended, produced to these albums from immediately the appropriate frame. High-quality bars, covered with the above materials, offer a new and impressive effect. The special surface structure offers a pleasant sensation of eyes and fingers and gives a uniform design of image collection. The combined albums and frames with their uniform surfaces are E.g. wedding, confirmation or similar eye-catcher for every special festive event, Has the Gold Book photo albums with the frame to match coordinated by Mira the artvera GmbH their range extended again useful and customer-oriented. artvera GmbH & co. KG Kant road 116 D-10627 Berlin phone: 030 / 31 51 74 3-0 (Mon-Fri 9:30 18:30) fax: 030 / 31 51 74 3-9 E-Mail: info at artvera.de Internet: artvera GmbH & co.

KG local court Charlottenburg HRA 42086 B personally liable partner: artvera Beteiligungs GmbH, Berlin District Court Charlottenburg HRB 116621 B Managing Director: Detlef Winkelewski the Artvera GmbH & co. KG is a picture frame from Berlin. The company operates several successful Web shops for picture frames and accessories, as well as an online shop for photography accessories. Artvera stands for innovative actions in the picture frame industry and sets new trends in this area.

Deutsche Telekom Foundation

How innovative is Germany? Karlsruhe/Berlin, 21st November 2010 – how innovative is Germany? The Institute Fraunhofer ISI, the Center for European Economic Research (ZWE) and the MERIT Maastricht of University Centre will answer this question by again comparing Germany from 2011 in a country ranking with the world’s leading industrial Nations. Current information about the innovation process are immediately published on the new website. Customer is the Federal Association of German industry (BDI) and the Deutsche Telekom Foundation. The innovation indicator has delivered important impulses and recommendations policy and economy over the past five years, when it came to highlight the German record of innovation and improve”, BDI President Hans-Peter Keitel said. But ranked Germany in 2009 in the innovation indicator below the 17 leading industrial nations the United States (7.0), were followed only at # 9 with a point value of leader 5,01. of Switzerland (6,93) and Sweden (6,76). 17th, Italy was with a point value of 1.00. According to BITKOM President August-Wilhelm Scheer especially software and IT services will be in the future an important strategic area of growth for the industrial location Germany. Ping Fu addresses the importance of the matter here.

Because now, Scheer, says more than half of all industrial products directly or indirectly from the use of ICT technology depended. The development of software and IT services is important in many German company. Such as at the Baden-Wurttemberg companies Bizerba, since 1866, known for the construction of scales. 2010 the company still scales, but even now it called a so-called system provider”. This means that the complexity of systems, playing together hard – and software, industrial processes and operations and automate that move the focus of the research. Dieter Conzelmann, Director industry solutions market at Bizerba, explained in a conversation with plain text online: in the even slight excess portionierungen in the course of time to significant material losses accumulate food processing industry.

Under portionierungen, however, are prohibited by law and could harm the company’s image. Both can afford no companies in the long term especially in difficult economic times. Using the appropriate software, production processes are therefore consistently optimized and reduces costly overfilling, rework, and Committee.” Even during the crisis, many industrial companies had continued high research efforts and not cut their budget for research and development, BDI President Hans-Peter Keitel said in an interview on. That was,”Keitel, a tremendous feat of strength, which now pays off in a boom, for example, by the boom in orders from China, India or Brazil. This feat was possible because very efficiently search for German companies. Apart from Sweden succeeds in any other country, with given budgets and researcher workforce so many economically exploitable To produce such as ideas in this country. Editing plain text ONLINE on the Hamdan 27 53127 Bonn E-Mail:

Benchmarkingstudie System

The German health system count worldwide to the most powerful and just separation GKV and PKV, take care of the efficiencies in the system. Asana addresses the importance of the matter here. The M + M insurance barometer 2011 the opinion of citizens, clearly shows: only 28.3 of the interviewed citizens perceive the existence of two competing health insurance systems as appropriate, the majority (48.0%), however, this does not consider useful. To make the existence of two competing health insurance systems in question is, shows also the statement by Wolfgang Greiner, Professor of health economics at the University of Bielefeld, the fact that currently only certain income or occupational groups have the possibility of private security, is extremely vulnerable and hampered a real competition between the systems.” This situation could be eliminated by the Elimination of the PKV. I think that the majority of the citizens were clearly reasonable it, if the choice of health insurance system would no longer be dependent on the level of their income”, as the expert. According to the majority critical attitude to the “current health insurance system is also the evaluation on the issue: there should be a distinction between statutory health insurance (GKV) and private health insurance (PKV) continue to in the future?” from. 6 out of 10 respondents are against separation, the rest in favour of them.

It is remarkable that even 41.4% of the PVK insured rejected a further separation. Insurance barometer M + M M + M published with the management + marketing consulting GmbH (Kassel) for the seventh time in a row a Benchmarkingstudie to customer orientation in the German insurance market. Customer satisfaction and customer loyalty and their interrelationships and effect relations are central investigation. Contact and more information: M + M management + marketing consulting GmbH Frank Opitz Dutch str. 198 34127 Kassel Tel: 0561-70979-17 fax: 0561-70979-18 M + M insurance barometer briefly In a representative survey will be legally since 2005 over 1,000 regularly and privately insured Citizens telephone based on their perception of the health insurance fund, in which they are currently insured, questioned.